英特蒙RTX64，即時作業系統的合作夥伴生態系統

內含英特蒙的RTX64 (即時作業系統，RTOS)。以RTX64為基礎的KINGSTAR EtherCAT總線主站支援並簡化了EtherCAT網路配置以及程式開發。KINGSTAR Fieldbus powered by EtherCAT支援CANopen over EtherCAT，並簡化了配置EtherCAT網路的難度。當英特蒙強大並可將Windows轉變成即時作業系統(RTOS)的RTX64軟體運行時，系統可提供最高精確度以及確定性的表現。KINGSTAR Fieldbus還有一個獨特且無可比擬的特色–自動探索/自動配置，可提供業界唯一的隨插即用功能。造訪 www.kingstar.com/tw.

United Electronic Industries, Inc -The High-Performance Alternative – is a supplier of high-end data-acquisition hardware and software. Its PowerDAQ family of DSP-based boards for both the PCI and PXI bus consist of multifunction cards (that encompass analog I/O, digital I/O, and counter/timers), simultaneous-sampling multifunction cards, high-density analog-output cards, and digital I/O cards including special models for applications such as timing sequencing. The firm has a broad offering of support software for all major operating environments including the ETS kernel. This driver-as well as support for all major test-development environments such as LabVIEW, Agilent VEE, and MATLAB-all ship free of charge with the hardware. UEI also offers the PowerDNA system, an Ethernet-based distributed networked automation system, which consists of compact Cubes users can locate next to sensors and easily link to a host PC. Each Cube contains its own intelligence and networking layer so it can operate as part of a commercial Ethernet setup as well as a standalone unit. Users populate the Cube’s I/O Layers with their choice of analog and digital I/O modules as well as those for mass storage and serial communications. Visit www.ueidaq.com.

Axiomtek Co., Ltd. is one of the world’s leading designers/manufacturers of PC-based industrial computer products and value-added services for systems integrators and OEMs/ODMs. Axiomtek delivers design and value-added services, along with its high-quality industrial PCs, single board computers, fanless and rugged embedded systems, EtherCAT Master Controllers, IoT gateway devices, touch panel computers, etc. – to a variety of industries including transportation, medical, industrial automation, power utilities and renewable energy, retail/POS/Kiosks and many more. Founded in 1990, Axiomtek has expanded its global reach from Asia to North/Latin America and Europe. Axiomtek USA headquarters is located in the City of Industry, CA. The subsidiary incorporates product integration and logistics as well as a wide range of service offerings including design assistance, technical support, and returns merchandise assistance. Axiomtek Systems in Methuen, MA, added its high level of expertise on COTS integration and a variety of value-added services to Axiomtek USA’s comprehensive suite of capabilities. Visit us.axiomtek.com.

Since 1984 the German company ADDI-DATA has been developing high-tech solutions for industrial measurement and automation. It stands for quality, adaptability, reliability, security of investment, and spirit of innovation. You will find ADDI-DATA solutions worldwide in numerous industrial areas: the automotive and metal industry, engine building industry, tailor-made machinery, aircraft, and chemicals industry, etc. They are used for quality control, process control, signal switching, data acquisition, motion control, or position acquisition. Visit www.addi-data.com.

Emotas GmbH is an embedded software development company for industrial communication. It focuses on CAN, J1939, CANopen, EnergyBus, and EtherCAT software development. It develops software products and custom embedded software solutions. The range of services covers consulting for development and integration as well as software maintenance and CANopen and EtherCAT training. Visit www.emotas.de/en.

ESD is an experienced system integrator that delivers products, turn-key solutions, and services to the industrial automation, process control, automotive, medical, aerospace, and test & measurement industries. The company provides IntervalZero RTX drivers for their CAN fieldbus cards with additional support for higher-layer protocols (CANopen, J1939, …) as well as an implementation of the Real-Time Industrial Ethernet protocol EtherCAT. Visit www.esd.eu.

Janz Tec AG, of Germany, is a leading manufacturer of electronic assemblies and customized industrial and embedded computer systems. With more than 30 years of experience in its markets, Janz Tec is capable of on-demand customization to meet individual customer requirements. Well-known companies from the mechanical and facility engineering, power & energy, transport & traffic, medical technology, and automotive sectors trust in the expertise, reliability, and experience provided by Janz Tec AG. Visit www.janztec.com.

Providing products, technologies, and services at the leading edge of industrial communication technology- including IntervalZero RTX drivers for its field bus cards – is Hilscher’s goal and it measures itself by the success of its customers.
Visit www.hilscher.com.

Keeps EtherCAT technology open for all potential users. It brings EtherCAT device manufacturers, technology providers, and users together to further the technology. It provides multiple technical working groups where experts carefully work on various specific aspects of EtherCAT. All of these activities are focused on one common goal: keeping EtherCAT stable and interoperable. Visit www.ethercat.org.

CAN in Automation (CiA) is the international users’ and manufacturers’ group for the CAN network (Controller Area Network), internationally standardized in the ISO 11898 series. The nonprofit association was established in 1992. The aim is to provide an unbiased platform for future developments of the CAN protocol and to promote the image of CAN technology. Visit www.can-cia.org.

OPC is the interoperability standard for the secure and reliable exchange of data in the industrial automation space and in other industries. It is platform-independent and ensures the seamless flow of information among devices from multiple vendors. The OPC Foundation is responsible for the development and maintenance of this standard. its purpose was to abstract PLC-specific protocols into a standardized interface allowing HMI/SCADA systems to interface with a “middle-man” who would convert generic-OPC read/write requests into device-specific requests and vice-versa. Visit opcfoundation.org.

PLCOpen is a vendor and product independent worldwide association active in Industrial Control that is creating higher efficiency in application software development and lowering life-cycle costs. As such it is based on standard available tools to which extensions are and will be defined. PLCopen made solid contributions to the community, extending hardware independence from software code, as well as reusability of code and coupling to external software tools. Visit www.plcopen.org.

Witekio is a precursor of complex and connected embedded systems. Witekio is an embedded software expert with a system-level approach, engineering and integrating intelligent systems software for any device from the hardware to the cloud. We bring expertise on both low (OS, driver, firmware) and high-level software (application, connectivity, cloud) associated with a usage knowledge on specific markets that allows the best choices in technologies and architecture for the best performance and security. Through our worldwide teams (Europe, USA, Asia), we help our customers, in all stages of development, to enable the success of their embedded systems or smart device projects and maximize their efficiency. Visit witekio.com.

ATR is a specialized provider of engineering R&D, technical services, and engineered products to the federal government and commercial clients. The Company provides a focused range of R&D and specialty engineering services, prototypes, and products through three interlinked business units: an Engineering and Systems Division; an Automated Systems and Machines Division; and a Robotics and Control Systems Division. Visit www.atrcorp.com.

Sequential Data Solutions – A 35+ Year Veteran of Real-Time Industrial Control. The broad range of experience in PLC, CNC, and Computer-Based Controls. Extensive experience with Reflective Memory and Ethernet-based control and data collection systems. Application Consulting and Design Specialist for RTX and RTX64 for both Industrial and Military customers. An experienced application specialist that thoroughly understands both hardware and software equally. Author and Designer of – RTX64 Global Memory Application. Contact Sequential Data Solutions.

dataPartner Ltd. produces and implements Information and Control systems and also develops custom hardware and software. It offers industrial solutions in specific areas: Production Planning; Monitoring and Data Acquisition; Device or Order Monitoring; Maintenance Management; Machine Control; Critical and Technological Processes Control; Instrumentation and Control Systems; Individual Software or specific Hardware Development; I&C and Process Automation. Visit www.datapartner.cz.

M&F Engineering is an independent technology and consulting firm. It specializes in tailored, robust software development for industrial use, including user interfaces, specialized real-time applications, and test systems. Visit www.m-f.ch.

THEORIS focuses primarily on two specific activities: embedded software and object technologies dedicated to complex systems. The company offers value-added services including, project management, consulting and expertise, training, and implementation. THEORIS assists large industrial companies, as well as small and medium businesses in high-tech projects. Its customers’ markets include telecommunications, multimedia, medical systems, automotive, industrial automation, transportation, simulation, and defense. Visit www.theoris.fr.

Germany-based TriLogiX solves complex problems in the areas of technical software, Windows programming, and IT network technology as an engineering service provider. Visit www.trilogix.de.

BJ Carnation (Beijing Pinks Technology Corporation) is committed to embedded platforms, solid-state storage products, network products, and advanced avionics platforms supporting product development, production and sales, and intelligent embedded systems, high-performance mass storage system, integrated avionics simulation system, high-performance network computing systems integration and development services. Visit www.vme.cn.

Torbis Technology CO., LTD’s expertise includes automation control design; servo/stepper motors; computer systems/adapter cards; and image recognition.